Easy steps on how to make a good liquid soap

The following listed below are the materials for 10 litres of liquid soap :

1. Natrosol
2. Caustic soda
3. Texapon
4. Sulphunic
5. Soda ash
6. SLS (sodium laure sulphate)
7. Fragrance
8. Color
9. Preservatives

Method of mixing
1. Measure and fill 10 litre gallon with water, from that same 10 litre pour out 4 litres or a custard full into a big bowl or 20litre paint bucket.

2. Pour in natrosol and mix fast with a strong stick, mix properly to avoid seedlike form.

3. In a small bowl, mix caustic soda with small quantity of water, mix properly and pour into the bucket and mix properly.

4. Mix texapon and Sulphunic together in a small bowl and pour into the bucket while stirring.

5. Mix soda ash with small water in a small bowl (note this: soda ash is a white chemical that gets hot when mixed with water, but not too worry, it's normal, just mix properly and pour into the bucket and stir).

6. Mix SLS with small water in a small bowl and pour into the bucket and stir.

7. Allow to ferment, say for an hour.

8. Pour in fragrance and stir.

9. Mix the color which can be in powder form with water and pour into the bucket and stir properly to achieve desired color.

10. Mix preservative with small water in a bowl and pour into the bucket.
Note: In absence of the chemical preservative, salt can be used as a preservative.

Now your liquid soap is ready for use.